Child pages
  • Presenting with Revelle Conference Room 4301 Projector
Skip to end of metadata
Go to start of metadata

Ways to Connect to Projector:

  1. Wirelessly 
  2. HDMI / VGA



Connecting Wirelessly:

  1. Push button under Wireless Video on the wall-mounted control panel. 
  2. Behind the wall-mounted control panel is a screen control panel with 3 switches. Flip middle switch to DOWN position to lower the screen and return switch to MIDDLE position once screen is completely down.
  3. Visit this website: http://igpp4301proj.ucsd.edu, which should also be visible on the screen. 
  4. If you encounter a message similar to the following (depending on the browser), click on Show Details and visit this website.

  5. Click Start Presenting
  6. Click Mac in the grey box to download the software. 
                        
  7. Click Allow to start the download. 
  8. In your Download folder, open up AirMedia file.  
  9. Select open this file.
  10. Follow the steps from screen below.
  11. On taskbar, click on AirPlay icon then select either AirMedia or AV-IGPP4301-AM.
     
  12. When prompted, enter in the 4 digit code found on the screen under the web address (URL).
  13. When done using screen sharing disconnect from airplay via task bar in top right corner, select turn off Air Play


           


14. When done with done with screen, please power down system by pushing the button under Power Off
 

15. Return to the screen control panel. Flip middle switch to UP position to raise the screen and return switch to MIDDLE position once screen is completely back up.

16. To disconnect from air play just go taskbar and click on the arrow to disconnect

     


Connecting to Projector with HDMI / VGA:  

  1. Select HDMI or VGA on the wall-mounted panel. 
  2. Behind the wall-mounted control panel is a screen control panel with 3 switches. Flip middle switch to DOWN position to lower the screen and return switch to MIDDLE position once screen is completely down.
  3. Choose the VGA or HDMI cord from the cords located below the chalk board.
    HDMI

    or VGA:
  4. Depending on your device, Using the HDMI or VGA connection may require a dongle. Use one of the attached dongles or come see us downstairs in 4112.
    USB-C to HDMI: 

    USB-C to VGA:
  5. When done with the screen, please power down system by pushing the button under Power Off
  6. Return to the screen control panel. Flip middle switch to UP position to raise the screen and return switch to MIDDLE position once screen is completely back up.


Additional information on capabilities of the Revelle Conference Room 4301 can be found here: Revelle Conference Room 4301